Product Care Guides

Stickers

Your sticker is made with premium vinyl and a water-resistant laminate for durability!

To apply your sticker:

✔️ Clean the Surface – Wipe down with mild soap and water or rubbing alcohol. Let it dry completely.
✔️ Smooth & Dry Only – Apply to a clean, flat surface for the best adhesion. Avoid textured, dusty, or damp areas.
✔️ Peel & Stick with Care – Gently peel off the backing and smooth the sticker from one side to the other to prevent air bubbles.
✔️ Let it Set – For best results, allow 24 hours for the adhesive to fully bond before exposing to moisture. Everyday use is fine after application!

To keep it looking great:

✔️ Gentle Cleaning – Wipe with a damp cloth and mild soap if needed.
Avoid Pressure & Heat – No dishwashers, pressure washing, or prolonged exposure to hot water.
✔️ Smooth Surfaces Only – Best applied to clean, dry, and flat surfaces for long-lasting adhesion.

To remove the sticker(s):

✔️ Peel Slowly – Start at a corner and gently lift the sticker off. Avoid yanking to prevent residue.
✔️ Use Heat – A hairdryer or heat gun on low heat can soften the adhesive for easier removal.
✔️ Residue Cleanup – If sticky residue remains, use rubbing alcohol, adhesive remover, or warm soapy water to clean the surface.

We are not responsible for any wear and tear caused by harsh washing conditions. Take care of the stickers for longevity.

Wax Melts

Our melts are suitable for use in electric and tea-light burners.

To use the melts, place a single wax melt in the wall of the burner. Warm wax will disperse fragrance as it burns. If a stronger scent is desired, add more melts.

⚠️Safety Tips:
✔️ Tea Light Burner Caution – Do not leave unattended. Ensure proper ventilation and never burn for more than 4 hours at a time.
✔️ No Open Flames – Wax melts do not require a wick or flame. Never attempt to burn wax melts like a candle.
✔️ Keep Out of Reach – Store away from children, pets, and flammable materials. Do not burn on elevated, unlevel, or non-fire resisitant surfaces.

🌡 Storage Tips:
✔️ Keep Cool & Dry – Store in a cool, dry place, away from direct sunlight and heat sources. Ideal temperature: Below 75°F (24°C).
✔️ Avoid Scent Fading – Keep wax melts in their original packaging or an airtight container to maintain fragrance.

🧼 Clean-Up Tips:
✔️ Let the Wax Cool – Unplug the electric warmer or blow out the tealight. Let the wax completely harden. For warm cleanup, place a cotton ball/pad or paper towel in the melt pot after turning off/extinguishing burner. Allow to cool fully before proceeding.
✔️ Pop Out or Wipe Clean – If the wax is hardened, gently pop it out or pull out cotton ball/pad/paper towel. If residue remains, warm the dish slightly and wipe with a paper towel.
✔️ Use Warm, Soapy Water – For stubborn residue, use warm, soapy water or rubbing alcohol on a cloth.
✔️ Never Pour Wax Down the Drain – Always dispose of used wax in the trash to avoid plumbing issues.

Candles

⚠️ Usage & Safety Tips:
✔️ Trim the Wick – Keep wick trimmed to 1/4 inch before each burn to prevent soot and uneven burning.
✔️ Burn in a Safe Area – Place the candle on a heat-resistant, stable surface away from flammable materials, drafts, children, and pets.
✔️ First Burn Matters – Allow the wax to melt evenly across the top to prevent tunneling (typically 2-3 hours).
✔️ Do Not Burn Too Long – Never burn for more than 4 hours at a time to prevent overheating.
✔️ Stop Use When Low – Discontinue use when 1/2 inch of wax remains to avoid glass overheating and cracking.
✔️ Never Leave Unattended – Always extinguish the flame before leaving the room or going to sleep.

🌡 Storage Tips:
✔️ Keep Cool & Dry – Store in a cool, dry place away from direct sunlight and heat sources.
✔️ Preserve the Scent – Keep the lid on (if applicable) to maintain fragrance quality.

🧼 Clean-Up Tips:
✔️ Remove Leftover Wax – To clean jars, place them in the freezer for a few hours and pop out the hardened wax.
✔️ Wash with Warm, Soapy Water – For residue removal, use warm water and mild dish soap. Avoid harsh chemicals.
✔️ Reuse or Recycle – Empty jars can be repurposed for storage, decor, or safely recycled!

Want to refill your candle jar with one of our scents? Reach out to hopewilson@goldenbeeartco.com or use our chat to inquire about our discounted refill program! Same jar, half the price. You pay for the wax and shipping, we'll handle the rest!

Resin Coaster

⚠️ Usage & Safety Tips:
✔️ Heat-Resistant, But Not Heatproof – Do not place extremely hot items (above 130°F / 55°C) directly on the coaster to avoid warping.
✔️ Avoid Sharp Objects – Resin can scratch, so be mindful of keys, knives, or rough-bottomed mugs.
✔️ Use on a Stable Surface – Ensure coasters are on a flat surface to prevent tipping. Bumpers are installed to aid in stability.

🌡 Storage Tips:
✔️ Keep Out of Direct Sunlight – Prolonged UV exposure may cause yellowing or softening.
✔️ Avoid Extreme Temperatures – Store in a cool, dry place to maintain the resin’s integrity.

🧼 Cleaning Tips:
✔️ Wipe with a Soft Cloth – Use a damp microfiber cloth or soft sponge for regular cleaning.
✔️ Mild Soap Only – Avoid harsh chemicals, alcohol, or acetone, which can dull or damage the finish.
✔️ Polish if Needed – If minor scratches appear, a small amount of resin-safe polish can restore shine.